ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 100)

Sensor Installation and Connection 3-39
Gathering Parts and Supplies
Be sure to obtain the following supplies before performing a special
installation to prevent any costly delays. When ordering, specify
the TRITON+ monitor special installation hardware. In addition,
please indicate the type of mounting hardware desired for mounting
the monitor: mounting bracket (wall/rim mount) or hook (rung
mount).
Quantity Description ADS P/N
1 TRITON+ flow monitor (battery or externally-
powered)
8000-FST-IM-GL or
8000-FST-IM-EP-
GL 1
1 Monitor mounting bracket/flange (for mounting
monitor to manhole rim or wall)
I40 –0009
3 Monitor mounting bracket bolt, hex, SS, M8 X
30mm
508058
3 Monitor mounting bracket washer, flat, SS 517-8001254-00
3 Monitor mounting bracket washer, lock, SS 517-8001274-00
1 as
needed
Hook, SS, 2-piece w/ hardware
(for hanging monitor on manhole rung;
Alternative to I40-0009)
8000-0021
Up to 2
(1 per
monitoring
point)
Peak Combo Sensor – upward ultrasonic depth
sensor, pressure depth sensor, & peak velocity
sensor w/ M3 x 6mm stainless steel, flathead
screws
8K-CS4-xx-35/1H
(35-ft./10.6-m or
100-ft./30.5-m
cable) 2
Up to 2
(1 per
monitoring
point)
Surface Combo Sensor – downward ultrasonic
depth sensor, pressure depth sensor, surface
velocity sensor, & surcharge velocity sensor
8K-CS5-V2-xx-
30/1H (30-ft./9.1-m
or 100-ft./30.5-m
cable) 2
Up to 2
(1 per
monitoring
point)
Ultrasonic depth sensor (downward ultrasonic
depth only)
8K-CS5-D1-00-30
(30-ft./9.1-m cable)
1 as
needed
IS Standard or Custom Sensor Extension
Cable for Ultrasonic Depth Sensor
8000-0023 –xxx 3
1 as
needed
IS Standard or Custom Sensor Extension
Cable for Peak Combo and Surface Combo
Sensors
8000-0025 –xxx 3
1 as
needed
Bracket, sliding, Ultrasonic Depth Sensor
(mounting plate)
8000-0307