ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 235)

6-48 ADS TRITON+ Manual
Temperature
The temperature sensor measures the air temperature in the pipe to
apply when calculating the speed of sound in air.
Note: Under normal conditions, the parameters in the
Temperature section should not require modification.
However, if additional adjustments are necessary, refer to
the detailed description of each parameter.
 Sensor Select the source from which to measure the
temperature used when compensating for temperature in
Ultrasonic Depth Sensor readings. The channels correspond to
the sensors connected to those channels (i.e., ports) on the
monitor. The option selected here should be consistent with the
option selected for the Channel in the Sensor section to the
left of the Temperature section.
Note: The stored temperature value is the actual air
temperature reading from the Ultrasonic Depth Sensor.
 Store Data Select this checkbox to ensure the monitor logs
the temperature data to memory. This option is selected by
default.