ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 143)

4-12 ADS TRITON+ Manual
Install the SIM card in the following way:
Note: Locate the monitor in a dry, clean area (i.e., an
adequate distance away from the manhole) before
installing the SIM card.
1. (applies only to static IP SIM cards) Record the number of the
SIM card (i.e., the IP address) on the site report. You will need
this address to reconcile billing and when setting up the LIF in
the Qstart software. The IP address is printed directly on the
SIM card or on a label affixed to the card.
Example of SIM card
2. Wipe away any debris or moisture that could enter the SIM
card enclosure on the monitor top once the cap is removed
from the enclosure.
3. Release and remove the plastic tie running between the locks
holding the cap on the SIM card enclosure.
SIM card enclosure with plastic tie securing the locks
4. Pull out the locks securing the cap to the enclosure, and remove
the cap from the enclosure.