ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 284)

7-10 ADS TRITON+ Manual
7. Using two wrenches, turn the inner nut counter-clockwise and
the outer nut clockwise simultaneously to bind the two nuts
together on the stud.
Binding the nuts together with the washer in between
8. Install the stud into the tapped hole using the outer nut to
engage the wrench. Continue turning the nut clockwise until
the stud is seated at least ¾ inch (20 mm) deep in the hole.
Installing the stud into the hole in the manhole rim