Note on the end search function – Sony CCD-TRV101 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Searching for the end Búsqueda del final

of the picture

de la imagen

You can go to the end of the recorded portion
after you record and play back the tape. The tape
start.s rewinding or fast-forwarding and the last 5
seconds of the recorded portion plays back. Then
the tape stops at the end of the recorded picture

(End Search).

Note that End Search function does not work

once YOU have ejected the cassette after you
recorded on the tape.

Press END SEARCH.
This function works when the POWER switch is

set to either CAMERA or VTR.

Después de grabar y reproducir la cinta puede

desplazarse al final de la porción grabada. La
cinta se rebobina o avanza rápidamente v se
reproducen los últimos 5 segundos de la porción
grabada. Después la cinta se detiene al final de la
imagen grabada

(búsqueda de imágenes

finales).

Ob.serve que la función de búsqueda de imágene

finales no se activa una vez extraído el
videocas.sette después de grabar en la cinta.

Pulse ENDSEAKCH.
Esta funciém se activa cuando el interruptor
POWER está ajustado en CAMERA o \TR.

Note on the End Search function

When

\'Ou

re-record continuouslv after using the

End Search function, you might not be able to
obtain smooth transition between lh<' last scene

and the next scene.

Nota sobre la función de búsqueda de
imágenes finales

Si vuelve a realizar grabaciones de forma
continua después de emplear esta función, es
posible que no pueda obtener una transición
uniforme entre la última escena v la siguiente

28

Advertising