Kontron CG1200 Carrier Grade Server - Manual (Page 19)

13
Kontron CG1200 Carrier Grade Server Installation and Maintenance Guide 13
Item Description Item Description
A PCIe x16 riser slot P SAS module
B CPU 2 DIMM slots Q Fan 1 power connector
C Rear panel I/O connectors R RKSAS4 storage key (pre-installed)
D PMBus connector S HSBP I
2
C connector
E CPU2 processor and DIMMs power
connector T SATA 0 connector
F Baseboard main power connector U IPMB connector
G CPU processor socket V SAS HDD connector SCU1
H CPU1 DIMM slots W SAS HDD connector SCU0
I CPU1 processor socket X SAS RAID module (ROC or IOC)
J Fan 5 power connector Y Front panel USB connector
K Fan 4 power connector Z SATA 1 connector
L Fan 3 power connector AA Front panel connector
M CPU1 processor and DIMMs power
connector BB Controller hub (PCH) chipset
N Fan 2 power connector CC I/O module connector
O Internal USB 6 connector DD RMM4 NIC or I/O module connector
2.11 Riser Card Assembly
The Intel
®
Server Board S2400EP4 has one riser slot capable of supporting a full-height, full-length PCIe
x16 riser card.
Once a PCI add-in card is installed and the riser card assembly is remounted in the chassis, the card is
accessible from the server back panel.
2.12 Ethernet NIC Ports
The S2400EP4 server board (baseboard) provides four network interface controller (NIC) RJ-45
connectors on the chassis back panel. Additional rear-accessible GbE NIC ports can be added to the
system by using a PCIe add-in card or installed as an I/O module.
2.13 Remote Management Module 4
RMM4 is a supported option on the S2400EP4 server board iBMC. To use this feature, a separately-
orderable RMM4 kit must be installed. Another option is an RMM4Lite kit that enables advanced features
in the iBMC without using a dedicated management NIC.