EVCO EPH4EXP Hardware manual - Manual (Page 102)

EVCO S.p.A. c-pro 3 | Hardware manual ver. 3.2 | Codice 114CP3E324
page 102 of 116
8. ACCESSORIES
8.1. Programming kit EVIF20TUXI
8.1.1. Introduction
EVIF20TUXI is a programming kit.
Through the kit it is possible to program the controllers with the application software realized through UNI-PRO 3.
The kit is made of:
- TTL / USB isolated serial interface
- USB cable (to connect the serial interface to the Personal Computer)
- TTL cable (to connect the serial interface to the controller).
8.1.2. Description
The following drawing shows the aspect of the programming kit EVIF20TUXI.
The following table shows the meaning of the parts of the kit.
Part Meaning
1 USB cable 2 m (6 ft) long
2 TTL cable 2.5 m (8 ft) long
3 TTL port
4 TTL / USB isolated serial interface
5 USB port