Additional information for electrical connection – EVCO EPH4EXP Hardware manual User Manual
Page 52
EVCO S.p.A.
c-pro 3 | Hardware manual ver. 3.2 | Codice 114CP3E324
page 52 of 116
4.5. Additional information for electrical connection
-
do not operate on the terminal blocks with electrical or pneumatic screwers
-
if the device has been moved from a cold location to a warm one, the humidity could condense on the inside; wait about an
hour before powering it
-
test the working power supply voltage, working electrical frequency and working electrical power of the controller; they must
correspond with the local power supply
-
connect the device to the other devices using a twisted pair
-
disconnect the local power supply before servicing the device
-
do not use the device as safety device
-
for repairs and information on the device please contact the EVCO’s sales network.