User interfaces, Preliminary information, Vgraph – EVCO EPH4EXP Hardware manual User Manual

Page 96: Introduction

Advertising
background image

EVCO S.p.A.

c-pro 3 | Hardware manual ver. 3.2 | Codice 114CP3E324

page 96 of 116

7.

USER INTERFACES

7.1. Preliminary information

The controllers in blind version can be used for example with an user interface such as Vgraph, Vtouch or Vroom.

7.2. Vgraph

7.2.1. Introduction

Vgraph is a new and innovative user interface for the programmable controllers of the family c-pro 3.

The main features of the interface are the possibility to communicate to the user a great deal of information and the remarkable ease of

control; these features are due to the use of a 128 x 64 pixel single colour LCD graphic display (black with rearlighting through white

LEDs), to the 6 buttons (with preset functions) membrane keyboard and to the CAN bus (for the connection to the controllers).

This last also allows the use of the interface in multimaster networks.

Thanks to its constructive features, Vgraph offers several mounting typologies; this is possible:

-

by panel, at the front of units, of machines for refrigeration or for air conditioning, of electrical panels and as well as in all those

applications where a frontal protection degree IP65 is required

-

built-in by wall, in traditional box (like "506" by BTicino)

-

by wall, on the support CPVW00 by EVCO (to order separately).

Also the necessity to customize the interface, in order to integrate it aesthetically in residential and commercial environments, is

satisfied by Vgraph since at the front of the interface one can apply both the plates CPVP* by EVCO (to order separately, made in

plastic material and available in two different colorations, white and black) and the numerous plates series "Living" and "Light" by

BTicino.

Vgraph also has got:

-

real time clock

-

alarm buzzer.

For further information consult the Hardware manual of Vgraph.

7.2.2. Summarizing table of the main features and available models

Vgraph

Power supply

24 VAC / 20... 40 VDC not isolated

12... 24 VAC / 15... 40 VDC isolated

Real time clock

incorporated

incorporated

Alarm buzzer

incorporated

incorporated

Display

128 x 64 pixel

LCD graphic display

128 x 64 pixel

LCD graphic display

Communication ports

a)

CAN

port

with

CANbus

communication protocol

b)

programming port

2

a + b

2

a + b

Code

EPV4GBR

EPV3GBR

For further models please contact the EVCO’s sales network at the address [email protected].

Advertising
This manual is related to the following products: