EVCO EPH4EXP Hardware manual - Manual (Page 79)

EVCO S.p.A. c-pro 3 | Hardware manual ver. 3.2 | Codice 114CP3E324
page 79 of 116
Parameters (1) AI Err Time 0 240 s 2
analog inputs time-out (after this time without
communication with an analog input, the
controller signals the analog input error)
Parameters (1) AO1 - - - - - - - - - FAN
kind of signal analog input 1
PWM = PWM (Pulse With Modulation)
cut phase to drive fans
Parameters (1) AO2 - - - - - - - - - 0-10V
kind of signal analog input 2
0-20mA = 0-20 mA
4-20mA = 4-20 mA
0-10V = 0-10 V
Parameters (1) AO3 - - - - - - - - - 0-10V
kind of signal analog input 3
0-20mA = 0-20 mA
4-20mA = 4-20 mA
0-10V = 0-10 V
Parameters (1) AO4 - - - - - - - - - 0-10V
kind of signal analog input 4
0-10V = 0-10 V
PWM = PWM (Pulse With Modulation;
5... 2,000 Hz)
Parameters (1) AO5 - - - - - - - - - 0-10V
kind of signal analog input 5
0-10V = 0-10 V
PWM = PWM (Pulse With Modulation;
5... 2,000 Hz)
Parameters (1) CosPhi 10us - - - - - - - - - - - - reserved
Parameters (2)
[ press button
RIGHT to
show it ]
I/O Timeout 1 240 s 60
time-out of the CANbus communication for
the test of the remote values of the I / O
(after this time without CANbus
communication, the I / O of the controller is
disabled)