Interlogix Monitor XL Hardware Guide - Manual (Page 30)

26 Monitor ISM/xL™ Hardware Guide 22-0375 rev1.1
Graphic Map Module cont.
A1 A2 A10 A9 A8 A7 A6 A5 A4 A3
F1 F2 F10 F9 F8 F7 F6 F5 F4 F3
E1 E2 E10 E9 E8 E7 E6 E5 E4 E3
D1 D2 D10 D9 D8 D7 D6 D5 D4 D3
C1 C2 C10 C9 C8 C7 C6 C5 C4 C3
B1 B2 B10 B9 B8 B7 B6 B5 B4 B3
G1 G2 G10 G9 G8 G7 G6 G5 G4 G3
Green
LED
Green
LED
Green
LED
Green
LED
Yellow
LED
Yellow
LED
Yellow
LED
LED position IDs on face correspond with those on PIN strip. All LEDs are RED except as shown.
MANUFACTURING FLOOR AREA
Using the Graphic Map
Module drawing software
can produce a diagram
similar to this. Points of
interest can be labeled
and illuminated for any
programmable output
condition by strategically
assigning the outputs to
the LEDs.
LED ID letters and numbers are
displayed in this example only.
A printed out drawing will not
show them.