Chapter 4 camera setup, Camera information, Dst time – Interlogix UltraView IP PTZ 36X Camera User Manual User Manual
Page 27
Advertising
UltraView IP PTZ 36X Camera User Manual
23
Chapter 4
Camera setup
This chapter describes how to configure the camera.
Camera information
Use the Basic Information folder to see system information about the camera.
This system information is prepopulated and cannot be changed manually such
as the the device description, MAC address, device type and SN, as well as the
firmware version and the current server time. The camera time and date can also
be synched to that of the PC by clicking the
Sync to PC time
button.
See Figure 7 on page 20 to see the Basic Information screen.
DST time
Use this menu to enable or disable daylight savings time (DST).
Advertising