Interlogix UltraView IP PTZ 36X Camera User Manual - Manual (Page 58)

Chapter 6: Network setup
54 UltraView IP PTZ 36X Camera User Manual
Figure 24: Network setting screen
Table 10: Network setting parameters
Parameter Description
Network settings IP address: Specifies the IP address of the camera. The default IP address
is 192.168.1.70.
Subnet mask: Specifies the subnet mask. Default value is 255.255.255.0.
Gateway: Specifies the gateway IP address. The gateway IP is used to
communicate in different network segments. The default value is 0.0.0.0.
DNS server: Specifies the IP address of a server. Default value is 0.0.0.0.
Device port: Specifies the port used for the Internet Explorer (IE) browser.
The default value is 8000.
HTTP port: Specifies the port used for the Internet Explorer (IE) browser.
The default value is 80.
NIC type: Specifies the NIC type. Default is 10M/100M Auto. Other options
include: 10M half-dup, 10M full-dup, 100M half-dup and 100M full-dup and
10M/100M auto. Default is 10M/100M auto.
Multicast address: Specifies a D-class IP address between 224.0.0.0 to
239.255.255.255. You do not need to specify this option if you are not using
the multicast function. Some routers prohibit the use of multicast function in
case of a network storm.
PPPoE settings Retrieves a dynamic IP address.
DDNS settings Specifies either DynDNS or IP server.