Chapter 6 network setup – Interlogix UltraView IP PTZ 36X Camera User Manual User Manual
Page 57
Advertising
UltraView IP PTZ 36X Camera User Manual
53
Chapter 6
Network setup
Accessing the camera through a network requires that you define the network
settings to be used. Use the “Network Parameters” folder to define:
• Network settings such as DHCP protocol, IP address, subnet mask, gateway,
DNS server, device port, HTTP port, NIC type and multicast address.
• PPPoE seetings
• DDNS settings
• Time settings
• E-mail settings
The current network settings are displayed in each screen. See Figure 24 below.
Change the parameters required and then click
Save
to save all changes made.
Note:
When a network parameter is modified, the camera will prompt you to save
and reboot.
Advertising