Reboot the camera – Interlogix UltraView IP PTZ 36X Camera User Manual User Manual
Page 71
Advertising
Chapter 8: Camera management
UltraView IP PTZ 36X Camera User Manual
67
Note: To restore only the camera settings back to the factory default settings,
see “Restore camera settings to default” on page 36.
Click the folder
Default
to open its screen. Click
OK
to the question “Restore the
default settings?” You will receive a prompt asking you to reboot the camera.
Reboot the camera
Use the
Reboot Device
menu option to restart the camera without changing any
settings. The option is located in the Remote Configuration folder.
Click the folder
Reboot device
to open its screen. Click
OK
to the question
“Restart the device?” The camera reboots.
Advertising