Interlogix UltraView IP PTZ 36X Camera User Manual - Manual (Page 47)

Chapter 5: Motion setup
UltraView IP PTZ 36X Camera User Manual 43
Using the PTZ direction buttons, manually move the camera to the left until
the desired limit is reached. Click
OK to stop.
4. Text appears on the screen with instructions on defining the movement
limitation to the right. Using the buttons again, manually move the camera to
the right until the desired limit is reached. Click
OK to stop.
The left and right limits are now set.
5. To clear the set movement limits, click Clear .
Preset tour settings
Preset tours (called “Patrols” in the menu) move the dome camera to different
steps and have it stay there for a set dwell time before moving on to the next
point. The steps are defined by presets. See Figure 19 on page 44.