Interlogix UltraView IP PTZ 36X Camera User Manual - Manual (Page 84)

Index
80 UltraView IP PTZ 36X Camera User Manual
H
Hard drive
capacity, 66
formatting, 66
free space, 66
Home preset position, 39
I
Image flip
set up, 35
Image freeze, 38
Initialize lens
set up, 35
Installing
flush-mount camera, 8
pendant-mount camera, 7
IP address set up, 53
Iris responce
set up, 34
K
Keypad control
speed, 38
L
Language of camera OSD, 17
Live mode
starting, 69
Local configuration parameters, 18
Logs
searching for logs, 73
viewing logs, 72
M
Manually recording live video, 70
Motion
settings, 37
Motion detection
set up detection areas, 58
setup, 57
N
Network setup
IP address, 53
Subnet mask, 53
Network Time Protocol (NTP), 53
Noise reduction in image
set up, 35
P
Park action, 39
Park time. See Dwell time
Passwords
default admin password, 14
modify user password, 65
Patrol overview. See Preset tour
Patrol set up. See Preset tour set up
Pattern. See Shadow tour
Pattern set up. See shadow tour set up
Pendant-mount camera
installing, 7
Playback
playing back recorded files, 72
searching recorded video, 70
Playback interface, 70
Power loss position of camera, 38
Pre and post-event recording times
description, 29
Preset
home preset position, 40
limit PTZ movement, 41
list of predefined presets, 75
set up, 41
speed, 38
Preset tour
set up, 45
Preset tour, 43
Privacy masking, 48
Proportional pan, 38
PTZ labels
OSD display, 38
R
Reboot camera, 67
Recording schedule, 28
Recording video parameters, 26
Remote configuration parameters, 20
Reset camera settings, 36
Resolution setup, 26
Restore camera settings to factory default, 36
S
Schedule tasks, 49
SDHC capacity, 66
SDHC card
access, 10
formatting, 66
SDHC free space, 66
Shadow tour
set up, 47
Shadow tour, 46
Shutter speed
set up, 34
Snapshots
In live mode, 70
In playback, 72
Stream mode setup, 26
Subnet mask set up, 53
Sync camera time to PC time, 23
System information about the camera
display, 23