Interlogix UltraView IP PTZ 36X Camera User Manual - Manual (Page 49)

Chapter 5: Motion setup
UltraView IP PTZ 36X Camera User Manual 45
Level Speed (°/s) Level Speed (°/s) Level Speed (°/s)
22 80 23 90 24 100
25 110 26 120 27 130
28 140 29 150 30 160
31 170 32 190 33 210
34 230 35 250 36 270
37 290 38 310 39 330
40 350
To set up a preset tour:
1. In the Motion folder, click the Patrol subfolder to open its screen.
2. Select a preset tour number from the “Patrol No.” list. The following screen
appears:
3. Enter a preset ID, dwell time (in seconds) and speed.
4. Click Save . The preset step is added to the tour list.
5. Click Add to add another preset to the tour. The screen reappears. Repeat
steps 2 and 3 and then click Save. The new preset is added to the tour list.
6. To add a new preset between existing presets in the list, select the preset
before the new preset and click Insert . Enter a preset ID, dwell time (in
seconds) and speed in the screen. Click Save . The new preset appears in the
list.
7. When all the required presets have been added to the tour list, click GoTo to
run through the preset tour to check that it is correct.