Interlogix UltraView IP PTZ 36X Camera User Manual - Manual (Page 9)

Chapter 2: Installation
UltraView IP PTZ 36X Camera User Manual 5
Figure 2: Overview of the dome camera
1. Ethernet RJ-45 connector.
Connect to the network devices.
2. Video output.
Connect the BNC connector to a CCTV
monitor. Optional.
3. Power supply cord.
Connect +24 VAC power supply.
4. Housing.
5. PTZ module.
6. Bubble.
Specifications
Operating temperature Pendant housing: -10 to +50 °C (-14 to +122 °F)
Flush housing: -30 to +65 °C (-22 to +149 °F)
Power supply 24 VAC +/- 4 VAC
Power consumption 30 W (heater on), 15 W (heater off)
Dimensions (mm) Pendant housing: Ш 220 Ч 261 mm (Ш 8.66 Ч10.27 in.)
Flush housing: Ш 206 Ч 241 mm (Ш 8.11 Ч 9.49 in.)
Environmental Pendant housing: IP66
Flush housing: IP54
Weight 5 kg (11 lb.)
System requirements
For proper operation, adhere to the following operational, cable, and power
requirements for the dome camera.
Cable requirements
Table 1 on page 6 lists the requirements for the cables that connect to the dome
camera.