LAARS NeoTherm NTV1000 - Install and Operating Manual - Manual (Page 105)

NeoTherm Boilers and Water Heaters Page 101
fig. 128 – lockout History Screen
The most recent lockouts appear at the top of
the list. Any lockout that has not been cleared
will appear in red.
5. You can see more detailed information on the
lockout by touching the entry on the screen.
Figure 129 shows the kind of display the
system will present.
fig. 129 – lockout Detail Screen
This screen shows the activity of most of the
parts of the system at the time the lockout
occurred. The list is too long to appear on one
screen, so you must scroll down to see some of
the items. When you are through looking at the
list, press OK.
6. From the Lockout History screen (Fig. 128),
correct the cause of the problem, then press
Clear Lockout to clear the lockout.
7. From the Lockout History screen (Fig. 128),
you can press the Alerts button to see a list of
recent alerts. See Fig. 130.
note – The Alert Log only lists the most recent
occurrence for each type of alert.
fig. 130 – alert log Screen
8. To get more information on a particular alert,
touch the entry for that alert on the screen.
Figure 131 shows the kind of display the
system will present.
fig. 131 – alert Detail Screen