LABEC M-MIA-LA - Manual (Page 23)

Ultrasonic milkanalyser
Operation manual 04.11.09 21/107
After the cleaning is finished the displays shows the following:
End of cleaning
After 2 seconds the display shows:
Analyser ready
Then the analyser is ready for normal measurement.
4.1.1.2. Manual start
The current cleaning may be completed by manual start of the menu
Cleaning. It is used before starting the menu Final Clean. It serves for
cleaning the fats from the measuring tract with alkaline cleaning solution with
which the canister is filled in. It is started using the menu for choosing the
working mode of the analyser. After the measurement is completes, by
continuous pressing the button Enter, the possible analyser operation modes
are shown on the display.
Cow
Sheep
UHT
Cleaning
Final Clean
By choosing Cleaning the current cleaning is started. The display shows the
following:
Auto clean
started!
Put empty glass
In this way the current cleaning is started. The procedure and operator’s
actions are described above.