LABEC M-MIA-LA - Manual (Page 42)

Ultrasonic milkanalyser
Operation manual 04.11.09 40/107
Due to continuous device improvement or due to the type of ordered type device
it is possible some of the functions of the analyser to be not active (options not
included). In this case, when trying to enter such function will display the
following message: Not available option
7.2. Menus Function:
7.2.1. Special modes.
Serve for choosing special (technological) working modes. After starting it the
following appears on the display:
Special modes
Calibration
Cycle
Exit
This mode is normally used in production conditions.
7.2.1.2. Calibration mode
In mode Calibration the analyser is ready to make measurement and to send
the received results towards the technological milk analysers calibration
system. For this purpose you need personal computer type IBM PC,
company’s calibration system LSC.EXE and methods for calibration of milk
analysers (see the corresponding documents). To start measurement in this
mode, the operator has to put a sample-holder containing milk sample in the
recess of the analyser and to press the button Enter.
7.2.1.2. Cycle mode
Mode Cycle serves for training the analysers. When you start this mode, the
analyser, without additional commands, sucks the sample, makes the
measurement, pours the sample out in the sample-holder and displays the
received results cyclically.
7.2.2. Corrections
Serves for entering corrections in the measured data. Detailed description in
point 6.3.2 and 6.3.3.