How to set selectors for straight stitching, How to set selectors for zig-zag stitching, Stitch width selector – SINGER 8614 User Manual

Page 27: Needle position selector, Pattern group selector

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before moving selectors, make sure needle is
out of the fabric

How to set selectors for straight
stitching

• Needle Position;

• Stitch Width: 0

• Stitch Length: .5 - 4 to suit fabric

(HD

CD

CD

How to set selectors for zig-zag
stitching

Pattern Group Selector: 1-2-3-4

• Needle Position: <Ldc!4=!>

• Stitch Width: 1 to 6

• Stitch Length: .5 - 4 to suit fabric

1. STITCH WIDTH SELECTOR

To produce a plain zig-zag or a decorative
stitch, the stitch width selector is moved from

its straight stitch position 0

to any of its other

five positions. The further you move the

selector lever toward the right, the wider your
stitch will be.

1-2-3-4

2-4||0 S'Nj 8^ lOf^ 12i

2. NEEDLE POSITION SELECTOR

Most of your zig-zag stitching will be done in

centre c!s needle position.
Left and right cL setting are used for
special stitch placement, as in button sewing.

3. PATTERN GROUP SELECTOR

For plain zig-zag stitching:

• Set stitch width selector on 0 (straight

stitch)

• Turn pattern group selector to

1-2-3-4

aligning number under*

mark.

25

Advertising
This manual is related to the following products: