Cleaning your machine, Removing bobbin case, Replacing bobbin case – SINGER 8614 User Manual
Page 71: Caring for your machine ,71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING YOUR MACHINE
CAUTION: Before cleaning your machine, dis
connect power line plug from your socket out
let
With a soft cloth or lint brush, clean all points
indicated by arrows, especially the bobbin
case area and feed. Also, clean exposed parts.
If necessary a mild solution of soap and water
may be used to remove stubborn stains. No
other cleaning liquid or powder should be
used.
Periodically apply a drop of oil only to the
areas indicated after cleaning.
CAUTION: Do not attempt to adjust the motor
belt Drive. Refer to your nearest Singer Service
Centre should any adjustments be required.
REMOVING BOBBIN CASE
Raise needle, open slide plate, remove needle
plate and lift out bobbin.
Turn bobbin case holder A to back as far as it
will go.
Lift out bobbin case B.
REPLACING BOBBIN CASE
Insert bobbin case with a back and forth mo
tion, so that front of the case is under the po
sition plate C. Turn holder all the way forward
to lock bobbin case.
Replace needle plate and close slide plate.
69