Procedure – SINGER 8614 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
T______
T
The twin-needle simultaneously produces two
parallel, closely spaced lines of pattern
stitching. You can stitch with either one or two
colours of thread.
•
• Pattern Group Selector: Stitch desired
• Needle Position:
J—
i,-l-i-l>
only
• Stitch Width;
2.5 - 3 onlyA
• Stitch Length: .5 - 4 to suit fabric
• General Purpose Needle Plate
• General Purpose Foot or Special Purpose Foot
Procedure
• Insert twin-needle.
• Place spool of thread on horizontal spool
pin and slide spool cap against spool.
•
Thread machine as for single-needle
stitching as instructed on page 21, pass
thread through thread guide above the
needle and in right eye of needle.
• Attach detachable spool pin with felt.
• Place spool of thread on detachable spool
pin and thread machine in usual
except by-pass snap-in thread guide.
way.
• Thread through remaining points making
certain to omit the thread guide above the
needle and pass thread through left eye of
needle.
A CAUTION: Do not use a stitch width greater than what is recommended. A wider stitch result in
needle breakage.
67