ADLINK PCI-8144 - Manual (Page 23)

Installation 13
2.4 Software Driver Installation
1. Auto run the ADLINK All-In-One CD. Choose Driver
Installation -> Motion Control -> PCI-8144.
2. Follow the procedures of the installer.
3. After setup installation is completed, restart windows.
Note: Please download the latest software from ADLINK website if
necessary.
2.5 SW1 Card Index Selection
The SW1 switch is used to set the card index. For example, if 1 is
set to ON and the others are OFF, that card index is 1. The index
value can be from 0 to 15. Refer to the following table for details.
Card ID Switch Setting (ON=1)
0 0000
1 0001
2 0010
3 0011
4 0100
5 0101
6 0110
7 0111
8 1000
9 1001
10 1010
11 1011
12 1100
13 1101
14 1110
15 1111
Table 2-1: SW1 Card Index