ADLINK PCI-8144 - Manual (Page 68)

58 MotionCreatorPro
In this menu, users can configure motion INT factor and gpio INT
factor.
1. GPIO INT Factor: Select factors to initiate the gpio event
interrupt. The related function call is
_8144_set_gpio_interrupt_factor().
2. Motion INT Factor: Select factors to initiate the event
interrupt. The related function call is
_8144_set_motion_interrupt_factor().
3. Buttons:
Z Next Card: Change operating card.
Z Next Axis: Change operating axis.
Z Save Config: Save current configuration to 8144.ini
and 8144MC.ini.