ADLINK PCI-8144 - Manual (Page 66)

56 MotionCreatorPro
5.3.4 Configuration Menu
In this menu, users can configure EL, M_IO_Sensitivity,
PulseLogic, SD_Singal and ORG_Stop.
1. EL Logic: Select the logic of the EL signal. The related
function call is _8144_set_limit_logic().
2. M_IO_Sensitivity: Select the configurations of the IO
Sensitivity. The related function call is
_8144_set_mio_sensitivity()
.
3. Pulse Logic: Select the logic of the pulse mode. The
related function call is _8144_set_pls_outmode().
4. SD_Singal: Select the configuration of the SD singal.
The related function call is
_8144_enable_sd_signal()
.
5. ORG_Stop: Select the configurations of the ORG_Stop.