ADLINK PCI-8144 - Manual (Page 78)

68 Function Library
6.1 List of Functions
Sec. Function name Description Page
6.3
System & Initialization 72
_8144_initial Device initialization 72
_8144_close Device close 74
_8144_get_version Get version numbers 75
_8144_set_security_key Set the security password 76
_8144_check_security_key Varily the security password 78
_8144_reset_security_key Reset the security password to default value 80
_8144_config_from_file Configure settings from file 82
6.4
Motion Interface I/O 83
_8144_set_limit_logic Set the logic of PEL/MEL input signals 83
_8144_get_limit_logic Get the logic of PEL/MEL input signals 85
_8144_get_mio_status Get the status of motion I/O signals 87
_8144_set_mio_sensitivity Set the sensitive of motion I/O signals 89
_8144_set_pls_outmode Set the logic of pulse output signal 91
_8144_set_pls_outmode2 Set the output pulse mode and it’s logic 93