Bonaire Comfort Control - RF/LV - Manual (Page 10)

Multi-Appliance Comfort Control
Navigating the Controls
shows' Fan only from your Heater (when no other appliance
is installed)
MANUAL/AUTO
• Press to select manual thermostat or programmed
operation for heating and manual or thermostat for
evaporative cooling.
ECONOMY/BOOST
• Select economy, boost or normal operating modes.
CLEAN FILTER/ZONE ABCD
• Press to select the different zones within the house (if
available) or to activate the CLEAN FILTER facility
when in COOL FRESH AIR mode.
SET TIME/PROGRAM
• Press & release to select the programming options.
• To SET TIME, press and hold the button until TIME is
displayed.
ENTER
• Press and release to save settings when in SET TIME,
PROGRAM mode and ZONE setting.
• Press and release to immediately send instructions.
PRECOOL
• Press & release MANUAL/AUTO and ECONOMY/
BOOST together to access PRECOOL settings.
PRECOOL can be set with the Controller OFF.
RESET
• Press & release SET TIME/PROGRAM and ENTER
simultaneously to reset the unit if RESET is displayed.
Comfort Control - PNE Page 10