Bonaire Comfort Control - RF/LV - Manual (Page 46)

Multi-Appliance Comfort Control
Controls- Installation / Setup / Commissioning
† Fan speed set is correct.
† Burner pressure is correct.
† Mounting pad/platform complies with requirements / codes.
A
DD - ON R EFRIGERATED A IR C ONDITIONING UNIT
† Unit Foundation correct
† All pipe work is welded and vacuumed down.
† Condenser Coil is purged before charging.
† System is charged, all joints checked and pressures set correctly
† Condenser unit is level
† All clearances around the condenser set to manufacturer’s specifications.
D UCTWORK
† All ductwork is completed to plan, correctly supported and airtight, with no bend less than 1.5 x the
ductwork diameter.
† Air distribution checked, dampers are adjusted and all outlets correctly adjusted and wiped clean.
† All roof penetrations are fully sealed and watertight.
† Manhole cover replaced.
S
ITE
† All rubbish has been removed from inside and on the roof.
C
USTOMER H AND O VER
† The operation of the Controller.
† The need to open windows and doors for the correct operation of Fresh Air Conditioning
† The operation of the bleed or dumping system and it’s importance to operate all the time in ducted
fresh air conditioning
† Maintenance requirements
Comfort Control - PNE
Page 46