Bonaire Comfort Control - RF/LV - Manual (Page 30)

Multi-Appliance Comfort Control
Ducted Evaporative Air Conditioning
C
OMFORT
C
ONTROL
– Q
UICK
R
EFERENCE
Your Comfort Controller can be used to operate your ducted evaporative air conditioner 3 ways being
Manual, Auto and Timer modes:
1. Manual Mode – to operate:
1.1. Turn ON the unit.
1.2. Set the fan speed to the desired level.
1.3. Set the pump ON or OFF.
1.4. Set the mode of operation e.g. ECONOMY,
BOOST OR NORMAL.
1.5. Turn OFF the unit when you no longer wish
to operate it.
2. Auto Mode (Thermostat) – to operate:
2.1. Turn ON the unit.
2.2. Press the MANUAL/AUTO button to select
AUTO.
2.3. Set the temperature scale to the desired
level.
2.4. The unit will now operate until the comfort
level has been achieved, adjusting the fan
speed as required. When the temperature
in the space increases, the unit will resume
operation.
2.5. Turn the control OFF when you no longer
wish to operate the unit.
3. Timer Mode – using the timer STOP or START
mode.
3.1. Select the evaporative cooler settings to
operate e.g. FRESH AIR, COOL FRESH
AIR, FAN SPEED or AUTO.
3.2. START or STOP at a specified time.
3.3. Use the ▼ or ▲ buttons to set the time for
ON or OFF.
3.4. To cancel the settings, press the control
ON/OFF button.
Comfort Control - PNE
Page 30