Cisco ASA 5505 - Manual (Page 1499)

67-73
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 67 Configuring Connection Profiles, Group Policies, and Users
Supporting a Zone Labs Integrity Server
Specifying the User Home Page
Specify a URL for the web page that displays when a user in this group logs in by using the homepage
command in group-policy webvpn configuration mode. There is no default home page.
To remove a configured home page, including a null value created by issuing the homepage none
command, enter the no form of this command. The no option allows inheritance of a value from another
group policy. To prevent inheriting a home page, enter the homepage none command.
The none keyword indicates that there is no home page for clientless SSL VPN sessions. It sets a null
value, thereby disallowing a home page and prevents inheriting an home page.
The url-string variable following the keyword value provides a URL for the home page. The string must
begin with either http:// or https://.
hostname(config-group-webvpn)# homepage {value url-string | none}
hostname(config-group-webvpn)# no homepage
hostname(config-group-webvpn)#
Configuring Auto-Signon
The auto-signon command is a single sign-on method for users of clientless SSL VPN sessions. It passes
the login credentials (username and password) to internal servers for authentication using NTLM
authentication, basic authentication, or both. Multiple auto-signon commands can be entered and are
processed according to the input order (early commands take precedence).
You can use the auto-signon feature in three modes: webvpn configuration, webvpn group configuration,
or webvpn username configuration mode. The typical precedence behavior applies where username
supersedes group, and group supersedes global. The mode you choose depends upon the desired scope
of authentication.
To disable auto-signon for a particular user to a particular server, use the no form of the command with
the original specification of IP block or URI. To disable authentication to all servers, use the no form
without arguments. The no option allows inheritance of a value from the group policy.
The following example, entered in group-policy webvpn configuration mode, configures auto-signon for
the user named anyuser, using basic authentication, to servers with IP addresses ranging from 10.1.1.0
to 10.1.1.255:
The following example commands configure auto-signon for users of clientless SSL VPN sessions,
using either basic or NTLM authentication, to servers defined by the URI mask https://*.example.com/*:
hostname(config)# group-policy ExamplePolicy attributes
hostname(config-group-policy)# webvpn
hostname(config-group-webvpn)# auto-signon allow uri https://*.example.com/* auth-type all
hostname(config-group-webvpn)#
The following example commands configure auto-signon for users of clientless SSL VPN sessions,
using either basic or NTLM authentication, to the server with the IP address 10.1.1.0, using subnet mask
255.255.255.0:
hostname(config)# group-policy ExamplePolicy attributes
hostname(config-group-policy)# webvpn
hostname(config-group-webvpn)# auto-signon allow ip 10.1.1.0 255.255.255.0 auth-type all
hostname(config-group-webvpn)#