Cisco ASA 5505 - Manual (Page 309)

8-17
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 8 Completing Interface Configuration (Routed Mode)
Feature History for Interfaces in Routed Mode
hostname(config-if)# nameif outside
hostname(config-if)# security-level 0
hostname(config-if)# ip address dhcp
hostname(config-if)# no shutdown
hostname(config-if)# interface vlan 200
hostname(config-if)# nameif business
hostname(config-if)# security-level 100
hostname(config-if)# ip address 10.1.1.1 255.255.255.0
hostname(config-if)# no shutdown
hostname(config-if)# interface vlan 300
hostname(config-if)# no forward interface vlan 200
hostname(config-if)# nameif home
hostname(config-if)# security-level 50
hostname(config-if)# ip address 10.2.1.1 255.255.255.0
hostname(config-if)# no shutdown
Feature History for Interfaces in Routed Mode
Table 8-1 lists the release history for this feature.
Table 8-1 Feature History for Interfaces
Feature Name Releases Feature Information
Increased VLANs 7.0(5) Increased the following limits:
• ASA5510 Base license VLANs from 0 to 10.
• ASA5510 Security Plus license VLANs from 10 to 25.
• ASA5520 VLANs from 25 to 100.
• ASA5540 VLANs from 100 to 200.
Increased VLANs 7.2(2) The maximum number of VLANs for the Security Plus
license on the ASA 5505 was increased from 5 (3 fully
functional; 1 failover; one restricted to a backup interface)
to 20 fully functional interfaces. In addition, the number of
trunk ports was increased from 1 to 8. Now there are 20
fully functional interfaces, you do not need to use the
backup interface command to cripple a backup ISP
interface; you can use a fully-functional interface for it. The
backup interface command is still useful for an Easy VPN
configuration.
VLAN limits were also increased for the ASA 5510 (from
10 to 50 for the Base license, and from 25 to 100 for the
Security Plus license), the ASA 5520 (from 100 to 150), the
ASA 5550 (from 200 to 250).