Cisco ASA 5505 - Manual (Page 178)

4-6
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 4 Configuring the Transparent or Routed Firewall
Configuring the Firewall Mode
Figure 4-2 shows two networks connected to the ASA, which has two bridge groups.
Figure 4-2 Transparent Firewall Network with Two Bridge Groups
Licensing Requirements for the Firewall Mode
The following table shows the licensing requirements for this feature.
Default Settings
The default mode is routed mode.
Guidelines and Limitations
This section includes the guidelines and limitations for this feature.
Context Mode Guidelines
• For the ASA 5500 series appliances, the firewall mode is set for the entire system and all contexts;
you cannot set the mode individually for each context.
10.2.1.1 10.1.1.1
Management IP
Bridge Group 2
10.2.1.2 Management IP
Bridge Group 1
10.1.1.2
10.2.1.3 10.1.1.3
254279
Model License Requirement
All models Base License.