Cisco ASA 5505 - Manual (Page 22)

Contents
xxii
Cisco ASA 5500 Series Configuration Guide using the CLI
DNS and NAT 29-24
Where to Go Next 29-27
C H A P T E R
30 Configuring Network Object NAT 30-1
Information About Network Object NAT 30-1
Licensing Requirements for Network Object NAT 30-2
Prerequisites for Network Object NAT 30-2
Guidelines and Limitations 30-2
Default Settings 30-3
Configuring Network Object NAT 30-3
Configuring Dynamic NAT 30-4
Configuring Dynamic PAT (Hide) 30-6
Configuring Static NAT or Static NAT-with-Port-Translation 30-10
Configuring Identity NAT 30-12
Monitoring Network Object NAT 30-14
Configuration Examples for Network Object NAT 30-15
Providing Access to an Inside Web Server (Static NAT) 30-15
NAT for Inside Hosts (Dynamic NAT) and NAT for an Outside Web Server (Static NAT) 30-16
Inside Load Balancer with Multiple Mapped Addresses (Static NAT, One-to-Many) 30-17
Single Address for FTP, HTTP, and SMTP (Static NAT-with-Port-Translation) 30-18
DNS Server on Mapped Interface, Web Server on Real Interface (Static NAT with DNS
Modification)
30-19
DNS Server and Web Server on Mapped Interface, Web Server is Translated (Static NAT with DNS
Modification)
30-21
Feature History for Network Object NAT 30-22
C H A P T E R
31 Configuring Twice NAT 31-1
Information About Twice NAT 31-1
Licensing Requirements for Twice NAT 31-2
Prerequisites for Twice NAT 31-2
Guidelines and Limitations 31-2
Default Settings 31-3
Configuring Twice NAT 31-3
Configuring Dynamic NAT 31-4
Configuring Dynamic PAT (Hide) 31-8
Configuring Static NAT or Static NAT-with-Port-Translation 31-15
Configuring Identity NAT 31-20
Monitoring Twice NAT 31-24