Reloading or resetting the module – Cisco ASA 5505 User Manual

Page 1264

Advertising
background image

59-18

Cisco ASA 5500 Series Configuration Guide using the CLI

Chapter 59 Configuring the ASA CX Module

Troubleshooting the ASA CX Module

To reset the module password to the default of Admin123, perform the following steps.

Detailed Steps

Reloading or Resetting the Module

To reload or reset the module, enter one of the following commands at the ASA CLI.

Detailed Steps

Command

Purpose

hw-module module 1 password-reset

Example:

hostname# hw-module module 1 password-reset

Resets the module password to Admin123 for user admin.

Command

Purpose

hw-module module 1 reload

Example:

hostname# hw-module module 1 reload

Reloads the module software.

hw-module module 1 reset

Example:

hostname# hw-module module 1 reset

Performs a reset, and then reloads the module.

Advertising