Cisco ASA 5505 - Manual (Page 1709)

74-123
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 74 Configuring Clientless SSL VPN
Capturing Data
Detailed Steps
Command Purpose
Step 1 capture capture_name type webvpn user
webvpn_username
Starts the capture utility for clientless SSL VPN.
• capture_name is a name you assign to the
capture, which is also prepended to the name of
the capture files.
• webvpn_user is the username to match for
capture.
Step 2 (Optional)
no capture capture_name
Stops the capture utility from capturing packets after
a user has logged in and began a clientless SSL VPN
session.
Step 3 Open a browser and enter the following:
https:// asdm_enabled_interface_of_the_security_appli
ance:port/admin/capture/capture_name/pcap
Example:
https://192.0.2.1:60000/admin/capture/hr/pcap Displays the capture named hr in a sniffer format.
Step 4 Repeat Step 2.