Cisco ASA 5505 - Manual (Page 1825)

80-13
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 80 Configuring Anonymous Reporting and Smart Call Home
Configuring Anonymous Reporting and Smart Call Home
Optional Configuration Procedures
This section includes the following topics:
• Configuring Smart Call Home Customer Contact Information, page 80-13
• Configuring the Mail Server, page 80-15
• Configuring Call Home Traffic Rate Limiting, page 80-15
• Destination Profile Management, page 80-16
Configuring Smart Call Home Customer Contact Information
Obtain the following customer contact information to configure this task:
• E-mail address (required)
• Phone number (optional)
• Street address (optional)
• Contract ID (optional)
• Customer name (optional)
• Customer ID (optional)
• Site ID (optional)
To configure customer contact information, perform this task:
Command Purpose
Step 1 call-home
Example:
hostname(config)# call-home
Enters call home configuration mode.
Step 2 contact-email-addr email-address
Example:
ciscoasa(cfg-call-home)# contact-email-addr
[email protected]
Configures the mandatory customer contact e-mail
address (if you have not already done so). The
email-address should be the Cisco.com ID account
that is associated with the device.
Step 3 (Optional)
phone-number phone-number-string
Example:
ciscoasa(cfg-call-home)# phone-number 8005551122
Specifies a customer phone number.
Step 4 (Optional)
street-address street-address
Example:
ciscoasa(cfg-call-home)# street-address “1234 Any
Street, Any city, Any state, 12345”
Specifies the customer address, which is a
free-format string that can be up to 255 characters
long.