Cisco ASA 5505 - Manual (Page 1684)

74-98
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 74 Configuring Clientless SSL VPN
Customizing Clientless SSL VPN Pages
Detailed Steps
Command Purpose
Step 1 webvpn Switches to webvpn configuration mode.
Step 2 tunnel-group webvpn
OR
group-policy webvpn
OR
username webvpn
Switches to tunnel-group webvpn configuration
mode.
Switches to group-policy webvpn configuration.
Switches to username webvpn configuration.
Step 3 customization name
Example:
hostname(config)# tunnel-group cisco_telecommuters
webvpn-attributes
hostname(tunnel-group-webvpn)# customization cisco
OR
customization {none | value name}
Example:
hostname(config)# group-policy cisco_sales
attributes
hostname(config-group-policy)# webvpn
hostname(config-username-webvpn)# customization
value ?
config-username-webvpn mode commands/options:
Available configured customization profiles:
DfltCustomization
cisco
hostname(config-group-webvpn)# customization value
cisco
Example:
hostname(config)# username cisco_employee attributes
hostname(config-username)# webvpn
hostname(config-username-webvpn)# customization
value cisco
Applies a customization to a connection profile.
name is the name of a customization to apply to the
connection profile.
Enters tunnel-group webvpn configuration mode
and enables the customization cisco for the
connection profile cisco_telecommutes.
Applies a customization to a group or use. The
following options are included:
• none disables the customization for the group or
user, prevents the value from being inherited,
and displays the default clientless SSL VPN
pages.
• value name is the name of a cu
Enters group policy webvpn configuration mode,
queries the security appliance for a list of
customizations, and enables the customization cisco
for the group policy cisco_sales.
Enters username webvpn configuration mode and
enables the customization cisco for the user
cisco_employee.