Nat in routed and transparent mode – Cisco ASA 5505 User Manual
Page 566
Advertising
29-12
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 29 Information About NAT
NAT in Routed and Transparent Mode
shows a typical identity NAT scenario.
Figure 29-11
Identity NAT
NAT in Routed and Transparent Mode
You can configure NAT in both routed and transparent firewall mode. This section describes typical
usage for each firewall mode and includes the following topics:
•
NAT in Routed Mode, page 29-13
•
NAT in Transparent Mode, page 29-13
209.165.201.1
209.165.201.1
Inside
Outside
209.165.201.2
209.165.201.2
130036
Security
Appliance
Advertising
This manual is related to the following products: