Cisco ASA 5505 - Manual (Page 1980)

Index
IN-18
Cisco ASA 5500 Series Configuration Guide using the CLI
See also policy map
MPLS
LDP 34-6
router-id 34-6
TDP 34-6
MRoute pane
description 26-4
MSIE client parameters, configuring 67-57
MTU 8-11, 9-14
MTU size, Easy VPN client, ASA 5505 71-5
multicast traffic 4-4
multiple context mode
logging 77-2
See security contexts
N
NAC
See Network Admission Control
naming an interface
other models 8-7, 9-10, 9-11
NAT
about 29-1
bidirectional initiation 29-2
disabling proxy ARP for global addresses 21-11
DNS 29-24
dynamic
about 29-8
dynamic NAT
network object NAT 30-4
twice NAT 31-4
dynamic PAT
about 29-10
network object NAT 30-6
twice NAT 31-8
identity
about 29-11
identity NAT
network object NAT 30-12
twice NAT 31-20
implementation 29-16
interfaces 29-21
mapped address guidelines 29-21
network object
comparison with twice NAT 29-16
network object NAT
about 29-17
configuring 30-1
dynamic NAT 30-4
dynamic PAT 30-6
examples 30-15
guidelines 30-2
identity NAT 30-12
monitoring 30-14
prerequisites 30-2
static NAT 30-10
no proxy ARP 30-13, 31-19
object
extended PAT 30-6
flat range for PAT 30-6
routed mode 29-13
route lookup 30-13, 31-24
RPC not supported with 45-3
rule order 29-20
static
about 29-3
few-to-many mapping 29-7
many-to-few mapping 29-6, 29-7
one-to-many 29-6
static NAT
network object NAT 30-10
twice NAT 31-15
static with port translation
about 29-4
terminology 29-2
transparent mode 29-13
twice
extended PAT 31-8