Cisco ASA 5505 - Manual (Page 251)

6-9
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 6 Starting Interface Configuration (ASA 5510 and Higher)
Guidelines and Limitations
Guidelines and Limitations
This section includes the guidelines and limitations for this feature.
Context Mode Guidelines
In multiple context mode, configure the physical interfaces in the system execution space according to
the
“Starting Interface Configuration (ASA 5510 and Higher)” section on page 6-12 . Then, configure the
logical interface parameters in the context execution space according to Chapter 8, “Completing
Interface Configuration (Routed Mode),” or Chapter 9, “Completing Interface Configuration
(Transparent Mode).”
ASA 5515-X VLANs:
Base License: 100
Interfaces of all types 1 :
Base License: 528
ASA 5525-X VLANs:
Base License: 200
Interfaces of all types 1 :
Base License: 928
ASA 5545-X VLANs:
Base License: 300
Interfaces of all types 1 :
Base License: 1328
ASA 5555-X VLANs:
Base License: 500
Interfaces of all types 1 :
Base License: 2128
ASA 5585-X VLANs:
Base License: 1024
Interface Speed for SSP-10 and SSP-20:
Base License—1-Gigabit Ethernet for fiber interfaces
10 GE I/O License—10-Gigabit Ethernet for fiber interfaces
(SSP-40 and SSP-60 support 10-Gigabit Ethernet by default.)
Interfaces of all types 1 :
Base License: 4176
1. The maximum number of combined interfaces; for example, VLANs, physical, redundant, bridge group, and EtherChannel interfaces.
Model License Requirement