Cisco ASA 5505 - Manual (Page 58)

Contents
lviii
Cisco ASA 5500 Series Configuration Guide using the CLI
Sending All Syslog Messages in a Class to a Specified Output Destination 77-16
Enabling Secure Logging 77-16
Including the Device ID in Non-EMBLEM Format Syslog Messages 77-17
Including the Date and Time in Syslog Messages 77-18
Disabling a Syslog Message 77-18
Changing the Severity Level of a Syslog Message 77-18
Limiting the Rate of Syslog Message Generation 77-19
Monitoring the Logs 77-19
Configuration Examples for Logging 77-20
Feature History for Logging 77-20
C H A P T E R
78 Configuring NetFlow Secure Event Logging (NSEL) 78-1
Information About NSEL 78-1
Using NSEL and Syslog Messages 78-2
Licensing Requirements for NSEL 78-3
Prerequisites for NSEL 78-3
Guidelines and Limitations 78-4
Configuring NSEL 78-4
Configuring NSEL Collectors 78-5
Configuring Flow-Export Actions Through Modular Policy Framework 78-5
Configuring Template Timeout Intervals 78-7
Changing the Time Interval for Sending Flow-Update Events to a Collector 78-8
Delaying Flow-Create Events 78-9
Disabling and Reenabling NetFlow-related Syslog Messages 78-9
Clearing Runtime Counters 78-10
Monitoring NSEL 78-10
NSEL Monitoring Commands 78-10
Configuration Examples for NSEL 78-12
Where to Go Next 78-13
Additional References 78-13
Related Documents 78-14
RFCs 78-14
Feature History for NSEL 78-14
C H A P T E R
79 Configuring SNMP 79-1
Information About SNMP 79-1
Information About SNMP Terminology 79-2
Information About MIBs and Traps 79-2