KBC Networks WESII User Manual
Page 110
WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 109 of 140
www.kbcnetworks.com
disabled. Please disable or reset the watchdog to a different IP in the event the
configured IP is known to be unreachable.
11.2.2.3 Services: NETWORK PING
The network ping tool enables an IP address to be to be pinged from within the WESII
unit which can help to confirm an Ethernet cable connection between the WESII unit and
the Ethernet device it is connected to. This tool can ping any IP on the network given
that the wireless unit has an established connection either wirelessly or over cable.
Click the ‘Ping Utility’ button and the following screen will appear.
Insert the IP address under ‘Destination IP/HOST’. The packet count & size can be
changed to a desired number of ping attempts and length of packet. If ‘continuous’ is
selected, the ping attempts will continue until ‘Stop’ button below is clicked. Continuous
pings will determine when a device has reconnected after either being rebooted or
having left the network.