KBC Networks WESII User Manual
Page 90
WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 89 of 140
www.kbcnetworks.com
Step 9:
Ensure that the Channel Spectrum Width is on 20/40M & ensure that the
Remote AP-ESSID is set to the same as the Host unit for each of the Client
units in the group. For a site with multiple, point-to-multipoint systems
you will need to assign separate SSID for every group of Host plus Client
units.
Step 10:
Select Site Survey to find the WESII Host you want to connect to.
Step 11:
The Site Survey will search for the KBC WESII Host that you want to
connect to. Click on the actual MAC address of the Host unit you want to
connect to.
Select:
<Site Survey>
Select:
the MAC address eg.
3c:0f:c1:00:12:83
Ensure this is on 20/40M
Ensure this is the same as the
Host unit you want to connect
to.