KBC Networks WESII User Manual
Page 122
Advertising
WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 121 of 140
www.kbcnetworks.com
Step 2:
Once the WESII system can been configured and properly connected, a
generic system map will be drawn like the one below:
Note:
a router symbol is used to represent the gateway. At this point, all nodes have the
same gateway IP address which is set to the gateway shown connected to the Client.
Step 3:
A background image can be uploaded by selecting the <Browse> button
and uploading the desired background image.
Note:
the image size is limited to 120KB and must be in a JPEG or GIF format. The
topology page will auto size to fit the uploaded image
Advertising