KBC Networks WESII User Manual
Page 35
Advertising
WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 34 of 140
www.kbcnetworks.com
Step 8:
Enter the MAC address of the Client unit that the Host will connect to in
the ‘Remote Client-Lock to MAC’. This can be found on the ‘Status’ page of
the Client unit or the rear label on the outside of the unit. The MAC
address must be entered in the following format: xx:xx:xx:xx:xx:xx.
Step 9:
Apply Settings
Step 10:
Save the changes.
Enter the Client MAC
address here
Select:
<Apply Settings>
Select:
<Save>
Advertising