KBC Networks WESII - Manual (Page 95)

WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 94 of 140 www.kbcnetworks.com
10.3 Cable lengths when installing WESII units
When installing the WESII units the total combined length of cables for any configuration
must not exceed 100m.
Note: The type of Cat5 configuration may be determined by the LAN port of the Ethernet
device. If the port is a 10/100 port, you may require a crossover cable. A crossover
cable is not necessary if the two PIMs connect into an Ethernet switch.
Most cables used to connect the WESII system are configured using a straight-through
color code.