KBC Networks WESII - Manual (Page 135)

WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 134 of 140 www.kbcnetworks.com
11.2.7 Advanced Wireless Configuration: Radio 1
This section can be used to alter the long range parameters of the link, this is necessary
for wireless link lengths exceeding 1.6km/1 mile and also to alter the value of the signal
strengths of the RSSI LEDs located on the back of the WESII units.
Long Range Parameters
It is recommended that for all links over 1.6km (1mile) the long range parameters must
be set. In the example below, the WESII is configured for a 1600m (1 mile) connection.
Both the Host/AP and Client units must be configured for the distance parameters: